 |
|
|
 |
|
 |
![]()
AMETEK VIS' C-COM 2G CAN-Communicator provides the advantages of a graphic display in a compact, 2-inch, gauge form-factor. This rugged and versatile gauge can be used exclusively or as a complement to any existing instrumentation simply by connection it to an SAE J1939 (CAN) data bus. The stored, directly from the vehicle data bus as text and/or graphics as specified by the customer.
The backlit liquid crystal (LC) display is 106 pixels wide and 56 pixels high, providing clear, legible graphics; a dead-fronted warning indicator is positioned above the graphic display window. Three backlit switches with tactile feedback provide a user interface. Backlighting can be red, green, blue amber, or white. The warning indicator can be red or amber.
The gauge is sealed to IP67 specifications both front and rear. The gauge operates from 9 to 32 volts DC and includes a switch-to-ground output that can be used to control an external annunciator, relay, or other device. An optional analog input is available for increased flexibility. Designed to withstand harsh conditions typical of off-road environments, the 2-inch display gauge meets all SAE J1455 and J1113 requirements for vehicular instrumentation.
Features
- 106 by 56 pixel graphic LC display
- 3-button user interface
- Dead-fronted LED warning indicator (amber or red)
- Sealed to IP67 specifications front and rear
- 9 to 32-volt operation
- J1939 (CAN) data bus input
- Switch-to-ground, 500-mA output
- Optional analog input
- Backlit LC display and switches
- Variable backlight control
Applications
- Heavy trucks
- Buses, coaches, and recreational vehicles
- Forklifts, wheel loaders, and skid steers
- Cranes, road-building, and construction equipment
- Earth-moving, and mining vehicles
- Utility and emergency vehicles
- Farm and agricultural vechicles
- Stationary engine instrumentation
|
 |
![]()
AMETEK VIS' C-COM LMC is part of a modular system that can satisfy the instrumentation requirements for all vehicle platforms. The C-COM LMC can be used independently, as part of the C-COM advanced system, or as a replacement to the current LMC with NGI gauges.
The large, easy-to-read graphics display provides real time data information, diagnostics, fault codes, user set up features, and maintenance requirements. This rugged and versatile message center can be used in various applications.
|
 |
The lightbar collects data from the vehicle's J1939 serial communications data bus, from discrete switch inputs, and from analog inputs. One of the J1939 CAN inputs can also be used as a J1587 data bus input. Three backlit switches with tactile feedback, along with soft-key prompts in the display, provide an easy, intuitive user interface.
This message center is sealed to IP67 specifications both front and rear. Designed to withstand harsh conditions typical of off-road environments, the C-COM LMC meets all SAE J1455 and J1113 requirements for vehicular instruments.
|
Features
- Graphics LCD 340 x 90 with heater
- Two SAE CAN J1939 data bus interfaces
- 28 LED customizable telltales
- Sealed to IP67 specifications front and rear
- Integral sealed buzzer
- Analog and switched inputs
- Switched outputs
- Three menu navigation switches
- 9 to 32 volt operation
- Backlit LCD and switches
- Variable backlight control
- Blackout mode via SAE CAN J1939 message or switched input
|
Applications
- Heavy trucks
- Buses, coaches and recreational vehicles
- Military vehicles
- Forklifts, wheel loaders, and skid steers
- Cranes, road-building, and construction equipment
- Earth-Moving, and mining vehicles
- Utility and emergency vehicles
- Farm and agricultural vehicles
- Stationary engine instrumentation
|
![]()
AMETEK VIS' C-COM 2A and 3A gauges are included in the CAN-Communicator family of products. These rugged and versatile gauges are part of a modular system that can satisfy the instrumentation requirements for all vehicle platforms.
The C-COM 2A and 3A can be used independently as direct read J1939 CAN gauges, or as part of the C-COM Advanced Instrumentation system.
The gauges are sealed to IP67 specifications both front and rear. C-COM 2A and 3A operate from 9 to 32 volts DC and include a multi-option input that can be used for backlighting, or as a resistive or analog input.
Designed to withstand harsh conditions typical of off-road environments, the 2A and 3A gauges meet all SAE J1455 and J1113 requirements for vehicular instrumentation.
|
 |
Features
- Direct J1939 CAN communication
- Heavy duty stepper motor drive (high G force)
- Backlighting controllable with either CAN bus or PWM input
- Sealed to IP67 specifications front and rear
- Integral warning light in each gauge
- Gauge mounting - screw-on clamp
- 9 to 32 volt operation
- Multi-option input for backlighting, resistive or analog
- Lens can be flat or domed
|
Applications
- Heavy trucks
- Buses, coaches and recreational vehicles
- Military vehicles
- Forklifts, wheel loaders, and skid steers
- Cranes, road-building, and construction equipment
- Earth-moving, and mining vehicles
- Utility and emergency vehicles
- Farm and agricultural vehicles
- Stationary engine instrumentation
|
|
|
 |
 |
|
|